Are you tired of having to stop your project to wait for your pipe fabrication order to arrive?
When you work with the best Ohio pipe fabrication experts, you not only get your project done on time, but you'll also get the best piping solution.
Our pipe fabrication team has experience working with complex piping systems, large and small projects, and many customized piping orders.
As industry leaders, we understand how to complete projects correctly, on time, and within budget.
Our pipe fabricator shop has decades of experience meeting customer specifications, completing complex assembly, and providing on-time delivery to ensure that our clients' projects are completed on schedule.
Every business and industry relies on piping systems. STEVENS specializes in pipe fabrication for a variety of industries, including the following:
Energy industry
Oil & Gas
Chemical
Power
Waste Water
Government
Food & Beverage
Our Ohio pipe fabrication facility is 40,000 square feet under roof on a 2.8-acre site with 28 feet of clearance. This means we can handle your project, no matter how big or small.
If you're ready to get a custom quote for your project, click on the button below.
If you want to know what areas we serve or see how our piping solutions are the best fit for you, keep reading.
Our facility is capable of completing a variety of pipe fabrication projects that other fabrication shops cannot.
We handle large/small bore pipe spools, pipe racks, equipment skids, and support steel, with diameters ranging from 12" to 72' and wall thicknesses ranging from light to XXH.
Our pipe fabrication shop features an 80' x 240' fabrication bay equipped with a 15-ton overhead crane and 22 feet of clearance under the hook, allowing us to handle any size project design requirements.
Additionally, we have a fit-up tack station and table, as well as 14 welding stations equipped with one- or two-ton jib cranes.
Want to see how our pipe fabrication services make a difference? Take a look at our recent projects to see how our pipe fabrication and installation services benefited these businesses.
Location: New Milton, West Virginia
STEVENS has performed several projects for MarkWest.
At their Midpoint Compressor site, near New Milton, West Virginia, our work started with a separate order with our wholly-owned subsidiary, CDMG, performing all of the pipe design. That was followed up by our fab shop, fabricating and shipping all of the spools as well as the slug catcher.
On-site, we performed site excavation and spoil removal. We placed 1,700 tons of limestone over a geotextile fabric. STEVENS performed all layouts, including anchor bolts, and installed more than 1,600 cy of concrete foundations and slabs encasing 110 tons of rebar.
With foundation, anchor bolts, and pipe racks in place, STEVENS proceeded to rig and set the three compressors, set and grout all equipment skids and tanks and then install and test all large and small bore piping. Much of this was done in the middle of winter.
| Categories : |
Pipe Fabrication
|
|---|
Location: East Chicago, Indiana
A third project well worth highlighting is the #2 Slab Caster Upgrade at ArcelorMittal Indiana Harbor West Facility.
During five months in 2016, STEVENS made extensive modifications to existing foundations. Our crews performed heavy rigging followed by precision level and alignment of a new slab caster along with refurbishing equipment from the tundish down to the cut-off machine — all with minimal engineering. Most of the piping for the new spray chamber, water, grease, air, and hydraulic we field routed and installed “as-built”.
All of the work was performed over multiple shifts, working more than 70,000 man-hours without a single safety incident.
| Categories : |
Pipe Fabrication
|
|---|
Location: New Milton, West Virginia
STEVENS has performed several projects for MarkWest.
At their Midpoint Compressor site, near New Milton, West Virginia, our work started with a separate order with our wholly-owned subsidiary, CDMG, performing all of the pipe design. That was followed up by our fab shop, fabricating and shipping all of the spools as well as the slug catcher.
On-site, we performed site excavation and spoil removal. We placed 1,700 tons of limestone over a geotextile fabric. STEVENS performed all layouts, including anchor bolts, and installed more than 1,600 cy of concrete foundations and slabs encasing 110 tons of rebar.
With foundation, anchor bolts, and pipe racks in place, STEVENS proceeded to rig and set the three compressors, set and grout all equipment skids and tanks and then install and test all large and small bore piping. Much of this was done in the middle of winter.
| Categories : |
Pipe Fabrication
|
|---|
Location: East Chicago, Indiana
A third project well worth highlighting is the #2 Slab Caster Upgrade at ArcelorMittal Indiana Harbor West Facility.
During five months in 2016, STEVENS made extensive modifications to existing foundations. Our crews performed heavy rigging followed by precision level and alignment of a new slab caster along with refurbishing equipment from the tundish down to the cut-off machine — all with minimal engineering. Most of the piping for the new spray chamber, water, grease, air, and hydraulic we field routed and installed “as-built”.
All of the work was performed over multiple shifts, working more than 70,000 man-hours without a single safety incident.
| Categories : |
Pipe Fabrication
|
|---|
Location: New Milton, West Virginia
STEVENS has performed several projects for MarkWest.
At their Midpoint Compressor site, near New Milton, West Virginia, our work started with a separate order with our wholly-owned subsidiary, CDMG, performing all of the pipe design. That was followed up by our fab shop, fabricating and shipping all of the spools as well as the slug catcher.
On-site, we performed site excavation and spoil removal. We placed 1,700 tons of limestone over a geotextile fabric. STEVENS performed all layouts, including anchor bolts, and installed more than 1,600 cy of concrete foundations and slabs encasing 110 tons of rebar.
With foundation, anchor bolts, and pipe racks in place, STEVENS proceeded to rig and set the three compressors, set and grout all equipment skids and tanks and then install and test all large and small bore piping. Much of this was done in the middle of winter.
| Categories : |
Pipe Fabrication
|
|---|
Location: East Chicago, Indiana
A third project well worth highlighting is the #2 Slab Caster Upgrade at ArcelorMittal Indiana Harbor West Facility.
During five months in 2016, STEVENS made extensive modifications to existing foundations. Our crews performed heavy rigging followed by precision level and alignment of a new slab caster along with refurbishing equipment from the tundish down to the cut-off machine — all with minimal engineering. Most of the piping for the new spray chamber, water, grease, air, and hydraulic we field routed and installed “as-built”.
All of the work was performed over multiple shifts, working more than 70,000 man-hours without a single safety incident.
| Categories : |
Pipe Fabrication
|
|---|
STEVENS can fabricate piping systems ranging from large and complex to extremely intricate with our expert fabrication team.
As an industry leader, we have the most advanced pipe fabricating technology, tooling, cutting and welding equipment, and a wide variety of mandrel benders.
We can produce 10,000LF of fabricated pipe per month with quality control and adherence to applicable codes and national standards.
STEVENS also performs full hydrostatic testing and documentation, as well as in-house chemical cleaning and flushing, and protective coating.
Don't hesitate to contact STEVENS if you require professionally - designed engineered pipes for your next pipe fabrication project.
Get a custom pipe fabrication quote today by clicking the button below.
